[[email protected]]

Well I took Splat's car for a baseline on our dyno before we put the AEM and Headers on and here is what it put down!

Check out the Video!

 

[[email protected]]

I don't know about the 1/4 mile.... Talk Splat into letting me track it!

 

[[email protected]]

Just added the video to the original post!!!

 

[[email protected]]

The 350whp runs were done in snow mode and 4th gear. The reason for this is we wanted to know why the car made so much less power in those modes. Turns out in snow mode the car has much less timing and only opens the throttle about 50% at the peak HP point. The very last run in the video is the Sport mode 6th gear pull, and that is when the car made 402whp.

 

[[email protected]]

Headers are going in as we speak! I will have an update soon!

 

[[email protected]]

Its up on the lift!

 

[[email protected]]

THEY ARE IN!!! Not welded yet but they fit! So just gonna get them welded up and then we will go from there!

 

[[email protected]]

Made 402whp with, ELITE Ported Intake and Throttle Body, Joe Z tube, Tom's Filter, and ISS Forged Cat Back. It actually made 414whp with our Proto ELITE Cold Air Intake... ... Oops I let the cat out of the bag... Mind you this is BEFORE the headers.....

 

[[email protected]]

Headers are getting welded as we speak!!

 

[[email protected]]

One is done!!!!

 

[[email protected]]

did u need to support the engine at all taking that subframe out?

Yes it is hanging from a support from the top

 

[[email protected]]

We are ready for pre-orders! http://www.lexusfforum.com/forums/showthread.php?p=23009#post23009

 

[[email protected]]

WTF my link didn't post.... It was there last night

 

[[email protected]]

The Dyno info is here.

http://www.lexusfforum.com/forums/showthread.php?p=23009#post23009

 

[[email protected]]

Yeah I know I am very sorry! This have been a much larger project than I had ever thought! But its all coming together and the goal is to have the car running later this week!!! THATS RIGHT!!!! THIS WEEK!!!!


STAY TUNED!!!

 

[[email protected]]

Sorry everyone, some unexpected delays came up, some with the car, and some with the business. We are working as hard as we can to get this buttoned up. Gonna have the proto manifold off in the next few days i will take some pics and show you where we had the issues.

The car must be in splats hands end of Feb, no excuses. So I am working really hard. Just just finally got our new CNC up and running as we were not getting the results we need from the old one.

We are expecting big things for the ISF in 2011!! Stay tuned!

 

[[email protected]]

Little Video Action.

http://www.facebook.com/video/video.php?v=1968170085288&oid=135316293200078&comments