Lexus ISF / IS-F / LFA / LF-A  Forum banner
21 - 40 of 85 Posts

· Registered
Joined
·
194 Posts
yes.. they are en route.
 

· Registered
Joined
·
188 Posts
Awesome!! I'm excited to send mine, but I want see gains before pull tHe trigger.
 

· Registered
Joined
·
194 Posts
Any news on the intake manifold and TB?

Please post gains when you get it to the dyno, and also please tell us what performance parts were on the car before and what was your WHP before.
Come on this isnt my first time at the dance, and check my exhaust thread you will see.

That being said i signed my slip so UPS should be dropping it off this afternoon at my house. Then tomorrow i have a track event at Homestead with the LF-A launch. So i should be gettting on this thursday!
 

· Registered
Joined
·
194 Posts
dropped my car off with janoy for it to get a baseline this afternoon or tomorrow. Once that is done i will be swapping the parts and going back to the dyno. We are looking to have everything done for the Huge lexus/supra meet this sunday!
 

· Registered
Joined
·
96 Posts
Great News. Ill be sure to talk to you in person at the show
dropped my car off with janoy for it to get a baseline this afternoon or tomorrow. Once that is done i will be swapping the parts and going back to the dyno. We are looking to have everything done for the Huge lexus/supra meet this sunday!
 

· Registered
Joined
·
188 Posts
the verdict isssss-----
 

· Registered
Joined
·
194 Posts
the verdict is we will be releasing the results by mid next week. we have more baselining of the car to do then swapping the intake driving and dyno it.
 

· Registered
Joined
·
194 Posts
Shit im still trying to get the OEM manifold off. I started it yesterday and spent two hours working under the hood. And let me tell you that once i got started and remembered that i needed to drain all the fluids and do this and that I said F it. Then I had Janoy call a Lexus Tech. (who will either except the job) or im flatbedding it to my STi shop and letting the man work wonders on it bc i dont have time for it. (In the Marines and working about 120hrs a week for haiti).
 

· Registered
Joined
·
194 Posts
Those awesome elves at ISSForged got the manifold off lastnight after i left it in there hands. They are swapping the new one on today and buttoning up everything then we will go off to the dyno either saturday or monday and results will be up. Sorry for the delay.
 

· Registered
Joined
·
188 Posts
awesome... I can't wait!!
 

· Registered
Joined
·
386 Posts
Man I hope there is a worthwhile increase, and thanks for your efforts here Splat :)
Andy
 

· Premium Member
Joined
·
243 Posts
Discussion Starter · #35 ·
The results are in!!!!!!! We gained 13whp! I don't have the dyno yet, but Splat text me and told me the good news! The dyno sheets will be up on Monday when he gets a chance to email them to me! So as for when the extra power comes on I don't know yet!
 

· Registered
Joined
·
11 Posts
I would like to see the air fuel ratio in order to see if the car leaned out. also would like to see the dyno graph, because I believe that the car had an aftermarket exhaust. but still if the car gained 13 rwhp that is good for a non forced induction engine.
 

· Registered
Joined
·
194 Posts
I would like to see the air fuel ratio in order to see if the car leaned out. also would like to see the dyno graph, because I believe that the car had an aftermarket exhaust. but still if the car gained 13 rwhp that is good for a non forced induction engine.
The ODB was hooked up for the dyno so everything will be readable. Andy has them in his email now. As for the exhaust yes it does have an exhaust, but the clear case of the matter is that it was dynoed with it on before for baseline and after. Also i wasnt getting 100% tps opening so im putting the blitz on today and then taking it back to dyno it again seeing if the tps will open up allowing more air in. Either way for the cost and what we have available right now for our cars i am very happy!!
 
21 - 40 of 85 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top