Lexus ISF / IS-F / LFA / LF-A  Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
429 Posts
Discussion Starter · #1 ·
Here is the alignment on my IS-F that is sitting about 1" dropped all around on BCR coilovers.

and the parts to get there pictured below it.. Pay closer attention to rear toe than to the camber numbers. -2 is not that bad if there is no toe steer. Installed, the toe links end up being nearly 1" longer than stock. Than means a much longer arc length and thus less toe/bump steer. The addition of the eccentric allows for about 1.5 degrees of camber. The inner rod end allows more like 4 degrees. So with this solution there will be lots of adjustment and more importantly, no bump steer and toe wear issues.





 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top