Lexus ISF / IS-F / LFA / LF-A  Forum banner
1 - 10 of 10 Posts

·
Premium Member
Joined
·
439 Posts
I took delivery of some Work T1S with the following specs:

Front: 19X9 +40 (R Disc) on PS2s 245/35/19
Rears: 19X10.5 +53 (A Disc)on PS2s 285/30/19

I have to test fit them still but anyone think the rears will rub?
Rears will be close, but they should work. If they rub, it should be minimal and easily fixed by slight trimming. BTW, why not go 255/295?
 

·
Registered
Joined
·
17 Posts
Discussion Starter · #3 ·
Yeah, it will be close, maybe a slight rub on inner felt liner on full compression.
The specs were shop recommended, they are pretty much the wheel gurus in town and originally I wanted to run 245F/275R but moved to the 285.

I can't test fit since it is -25C outside and the garage is cold. Can't wait to put them on though and will post pics.
 

·
Registered
Joined
·
17 Posts
Discussion Starter · #7 ·
Yes, you're right, going 255 would be ideal. I'll use the stock 255s when I wear out the fronts. I tested more today and definitely the rear is bang on. There is a chance it can run 295s but it would be very very close and I wouldn't want to do any trimming.

Hope this helped you fellas out with size and offsets :D
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top