Lexus ISF / IS-F / LFA / LF-A  Forum banner
1 - 1 of 13 Posts

· Registered
Joined
·
139 Posts
If you look very closely you will find : Where the areas appear bent, this is where the mesh is attached from behind. The purpose is most likely to sustain rigidity in the mesh and prevent any rattles. The mesh has to be attached somehow and this is their method.
 
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top