Lexus ISF / IS-F / LFA / LF-A  Forum banner
1 - 1 of 3 Posts

· Registered
139 Posts
Here's a solution> go ahead and install the bumper plugs yourself.

Take your time and make sure to line them up with each other. This is easy just put a piece of tape horizonally from one hole to the other and make sure the holes that were drilled are level with each other. Mark the spot where you want to enlarge the hole according to the directions for the hole plugs. You probably won't even have to drill, you might want to use a small rat tail file to enlarge the hole to the proper dimensions. If you can't stand the look of the finished project you will always have the option of having the holes filled in and painted. This will cost $$$$.

Good Luck,
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.