Lexus ISF / IS-F / LFA / LF-A  Forum banner
1 - 1 of 3 Posts

· Registered
222 Posts
Its pretty easy just a pain in the ass unless you have small hands. Take off the clips holding down the plastic covers and remove it. There will be a cap over the housing. There is a metal clip holding it in place. Push the clip to the side and take off the cover, twist the old light too pop it out, replace with the new one and put it all back together. On the passenger side you will need to remove the entire intake box to be able to reach the housing. There are a couple small bolts holding it down. once those are out it just pops out with a decent tug.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.