I'm going to kill myself if I don't get this thing shut off.

I tried the DIY's I found online on all the forums, they don't work.

They definitely do work! Let me see if I can find the one that worked for me. And yeah, it's super annoying.

1-With engine running, make sure odometer is displaying total miles (not trip A or B)

2-Turn off car

3-Push the start button twice.. (Do Not press pedal)

As soon as the gauges begin cycling:

4-Press and hold the trip button for 20 seconds.
5-After 20 seconds, click and fasten your drivers seat belt.. still holding the trip button down.

A selection will appear in the ODO section that says "B-ON" or "B-OFF".
Press the trip button till it reads B-OFF.

This should disable both the driver and passenger seat belt chimes.

^Also apply to 2011 model? I will try it out tonight

Matt,

This is the one I've been trying... did it 4 times in a row. Gonna go outside and try it again.

I'm in Canada if that makes a difference?

This one works for the Euro spec 2IS including the IS-F :

-Make sure no seat belt is attached
-Press the start button twice without pressing the brake pedal (engine off)
-Make sure odometer is displaying total miles (not trip A or B)
-Switch off the car
-Press the start button twice without pressing the brake pedal (engine off)
=> As soon as the gauges begin cycling push the trip button and after 20 seconds click and fasten your drivers seat belt still holding the trip button down.
-After 30 seconds a selection will appear in the ODO section that says "B-ON" or "B-OFF".
-Press the trip button till it reads B-OFF.

Gonna give it a shot too.

Just did mine...worked as stated

I did this one... and it worked.

I love the internet.

I love forums!